Equipment Found

Item is a used, Simplex, S/S, twin cylinder, piston filler, Maximum fill is 16 Oz./cylinder. Machine utilizes a mechanical, cam operated piston drive and pneumatic cylinder for the rotary valve. The machine is mounted on a S/S table and includes a large, funnel style hopper with vision port and thermometer.

Item is a used, REB, model IVS-6-Gallon piston filler. Machine is fully automatic. It was manufactured in 2016 an was previously utilized in a food factory running mayonaise. All contact parts are S/S or food grade plastic.. The rotary valves and the piston drive are powered by on-board hydraulic unit. The nozzles are impingement type with pneumatic heads that raise and lower to allow penetration of the container. The machine is equipped with a 10' long by 4 1/2" wide integral conveyor with a pneumatic, container indexing system. Filling nozzles are 1 1/8" diameter. The product reservoir is approximately 12" x 5' x 20".

Item is a used, Hinds Bock 128 oz., pneumatic drive, piston depositor/pump. Machine has all S/S contact parts and 3" ports. Machine is mounted on a S/S table with casters for portability.

Item is a used, Inline Filling Systems, automatic, six head, inline, ionized air, bottle/jar rinser. Machine is currently set up with automatic container indexing controls, but no conveyor is included..

Item is a used, Simplex, 4 head, automatic, injline, filler. The machine is equipped with 4 11/16" filling nozzles and a pneumatic container indexing system. This is a pressure overflow system with a return tank and product supply pump to the nozzles. This is a frame mounted machine with an integral 10' long conveyor. Previous use was in a liquor bottling facility. Power requirement is 230 volt/3 phase/ 50 hz.

Item is a NEW STOCK, semi-automatic, single station, 100 ml to 1,000 ml, table top, piston filler. Machine has stainless steel hopper.

Item is NEW STOCK, single station, semi-automatic, bench top, piston filler capable of 50-500 ml fills. Machine requires compressed air and 120 volt power. The container is placed under the nozzle and the cycle is initiated with a foot or hand switch. There is an automatic mode on the machine eliminating the need to initiate each cycle if the fills are large enough to give the operator time to transfer containers during the back-stroke of the piston. A hopper/reservoir is included with the machine as well as a hose to connect to an elevated product source.

Item is a new, semi-automatic, single station piston filler having a maximum fill capacity of 500 ML. It operates on compressed air and requires 120 volt single phase power.. Sanitary construction with all S/S contact parts.